Model Number: NT-ENU4100-M#1 Brand Name: N-net Key Specifications/Special Features: Overview:N-net model NT-ENU4100 is an Ethernet extender over UTP cable. One NT-ENU4100 EO2 at the remote end can support one or multi IP network devices. This EO2 can transmit over telephone line, Ethernet cable, and twisted pair. It is provided with excellent lightning protection and anti-interference capacity. In the real work environment, the max network bandwidth could reach 60Mbps. With the Ethernet extended to 750meter, it has enlarged the Ethernet network application area, cutting down the project cost to the most by using Cat5e or Cat6 cable.N-net model NT-ENU4100-AF/ AT series is EO2 with POE function, accepting power from network end model NT-ENU1400 and meanwhile powering connected IP network devices, such as IP camera, wireless AP, IP phone and other PD device, default as slave terminal.Features:* Modulation frequency: 2 MHz-28 MHz* Modulation method: OFDM* Encryption: AES128-bit encryption* Networking: One Master and 7 Slaves* Protocol：IEEE802.3/u, 10Base-T, 100Base-TX, IEEE802.1Q VLAN, IEEE802.3af/at
* Support Auto-sensation of MDI/ MDIX at Ethernet port, compatible with NIC, switch and HUB etc.
* Support up to 1522Bytes data packet
* Support Store and forward working mode; backpressure on Half-Duplex and flow control Full-Duplex.
* Power supply range: DC 12V-48V;
* Working temperature: -20-70℃
* Support Ethernet ESD protection and EFT
* POE (15.4W) and POE+ (25.5W) supported

Specification: